Salus RM16A relais bedraad

RM-16A

16A - relay module

The RM-16A relay module is used to enable / disable electrical devices. Thanks to its small dimensions, it can be mounted in a flush-mounting box, or where there is a need to control a receiver with a maximum load of 16 A.

Example use:

• Control of a heating device (ON-OFF type) by 230V AC voltage signal from thermostat from EXPERT NSB, HTR, BTR series (e.g. VS30 / HTRP / BTRP).


• Control of a solid-fuel boiler (which requires an NC/COM contact) by connecting a temperature thermostat with a COM/NO output to the RM16-A relay module (e.g. T105).


• Connecting a receiver which needs more power than the thermostat relay allows. The maximum current consumption of an electrical device should not exceed 16A.


• To relieve wiring centre's relay (KL06 / KL08NSB / KL08RF) when more actuators are connected than allowed or other devices than thermoelectric actuators are plugged into the wiring centre's zone outputs (e.g. pumps, motor valves, electric heating mats).

Technical specifications

• Power supply: 230V AC 50 Hz


• Rating Max: 16 A / 250V AC


• Voltage free NO / COM input: Connection of a thermostat with a NO / COM voltage free relay


• SL voltage inputs: Connection of a thermostat with a 230V AC


• Output signal: NO/COM/NC relay


• Dimension (mm): 47 x 47 x 20