Thermostats

Wireless on / off thermostat RFTC-10
The simple thermostat in LOGUS 90 design, measures the room temperature through internal sensor, and based on the set temperature, it sends a command to control the heating.

DESCRIPTION
The thermostat can be used in two ways:

1: For controlling an additional heat source (heater, oil radiator, radiant panel) with multifunctional switching units RFSA-6 x, RFUS-61 or RFSC-61.
2: For sufficient temperature correction (+/- 10 ° C) in the course of the program, set in the thermostat (temperature change applies until you set the next program change, of the heating in the system unit).

DESCRIPTION
• The illuminated LCD display shows the current and set temperature, status (ON / OFF), battery status, etc.
• Manual operation using the buttons on the device.
• Controls the measured temperature on the system unit with 5-min. intervals. It send a signal with sudden temperature changes.
• Color design of the LOGUS 90 frames (plastic, glass, wood, metal, stone).
• Thanks to the flat back of the device, you can place it anywhere in the room where you want to measure the temperature.

TECHNICAL PARAMETERS
• Battery power 2 x AAA (1.5 V), with battery life of approximately 1 year based on frequency of use.
• Number of measured temperatures 0 - 55 ° C.
• Range up to 100 meters (open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20.
• Communication frequency (868 MHz, 866 MHz, 916 MHz, 922 MHz) with bidirectional protocol RFIO or RFIO2.
• RFIO2 is an innovative iNELS RF wireless communication control protocol, which brings you more stability and eliminates signal collision between individual components.
• Can be mounted on a cable / flush-mounted box.

Pay attention: Exclusive frame (art.nr. 28597)