Elko EP RFTC-50 wireless clock thermostat

Wireless programmable thermostat RFTC-50
The programmable thermostat in LOGUS 90 design, measures the room temperature by internal sensor, and based on the set temperature, it sends a command for heating.

DESCRIPTION
The temperature controller can be used in two ways:

1: For controlling an additional heat source (heater, oil radiator, radiant panel) with multifunctional switching units RFSA-6 x, RFUS-61 or RFSC-61.
2: For underfloor heating, the internal sensor scans the room temperature. Based on that value, the RFSTI-11B heating unit switches the heating.

DESCRIPTION
• The illuminated LCD display shows the current and set temperature, status (ON / OFF), battery status, day of the week, current time, etc.
• Possibility to set daily / weekly program.
• Manual operation using the buttons on the device.
• Sends the measured temperature to the system unit within 5 minutes at intervals.
• It sends a signal in the event of sudden temperature change.
• Color combination of temperature unit in LOGUS 90 frame design (plastic, glass, wood, metal, stone).
• Thanks to the flat back of the device, you can place it anywhere in the room where you want to measure the temperature.

TECHNICAL PARAMETERS
• Battery capacity 2xAAA (1.5 V), with a lifespan of approximately 1 year based on the usage frequency.
• Range of measured temperature: 0 ° C to +55 ° C.
• Range up to 100 m (in open space), if the signal is not sufficient between the controller and the unit, use the RFRP-20 signal repeater.
• Communication frequency (868 MHz, 866 MHz, 916 MHz, 922 MHz) with iNELS RF Control bidirectional protocol.
• Can be mounted on a cable / flush-mounted box.

Pay attention: Exclusive frame (art.nr. 28597)